With our vision for future growth and development and most important is to excel in engineering product design our very own R&D department was set up in June 1995. To further enhance our position as technological specialist in anti-vibration products / Spring Vibration Isolators design and R&D we are technically linked-up with UTM (Universiti Teknologi Malaysia).
As such we are proud of being one of the few companies selected under "UNIVERSITY-INDUSTRY TECHNOLOGY ADVANCEMENT PROGRAMME" (UNITAP) of Universiti Teknologi Malaysia. Besides we are also working closely with LGM (Lembaga Getah Malaysia / Malaysia Rubber Board) for specialist advise on physical as well as chemical analysis & testing of our rubber products of which a variety of our rubber products are being displayed in the International Rubber Products Exhibition Centre Malaysia, of LGM in Sungai Buloh, Selangor State which was opened on the 28th of April, 1997.
Original Design Manufacturer - Supplier Of Anti-Vibration Products
Vibratech Industries Sdn Bhd is now an O.D.M. (Original Design Manufacturer) supplier of anti-vibration products to major names of Air-Conditioning Equipment Manufacturers in Malaysia, such as YORK (by O.Y.L. Condair Industries Sdn Bhd, in Shah Alam), DUNHAM-BUSH (by Dunham-Bush Industries Sdn Bhd, in Bangi), TRANE (by TM Air-Conditioning Sdn Bhd in Prai, Penang).
Besides this we are also the major supplier of spring vibration isolators to majority of M&E / air-conditioning contractors and dealers alike throughout the Peninsular Malaysia, Sabah and Sarawak. Now we are not limited by local participation only but also are exporting to U.A.E., Canada, China, Hong Kong, Singapore, Myanmar, Vietname, India, The Philipines, Bangladesh & Indonesia directly or indirectly.
Year 2004 was another year of celebration for Vibratech Industries Sdn Bhd as it was the year that we have achieved the ISO 9001:2000 Certification as well as the Winner of The 3rd Asia Pacific International Honesty Enterprise-Keris Award 2004 almost simultaneously towards the end of the year.
YDS is Tomahawk's design of free-standing, unhoused, single or multiple steel spring vinration isolators, YDS-A. YDS-B, and YDS-C are three series of nominal one 1-inch deflection type while YDS-2A, YDS-2B, YDS-2C are that of 2-inch deflection type. All the YDS sereies spring vibration isolators consist of spring mounting caps, assembled with level adjustment bolts and locking screws, color coded steel springs for easy load identification and one piece molded, non-skid noise breaking neoprene base.
The steel springs are assured of safe working stresses thanks to optimum computer design. For lateral stability requirement all springs are designed to meet a minimum ratio of 0.80, the spring outside diameter (OD) to a loaded operating height. Also a minimum of 50% additional deflection from rated load before compression to solid is inherited in the design to help accomodate error may have in weight distribution.
YDS Multiple Spring Mounts series
YDS Multiple Spring Mounts series of YDS-C models are Tomahawk's 1-inch rated deflection, free standing & unhoused spring vibration isolators. Load capacity is greatly expanded by the multiple models apart from their single ones respectively. YDS Multiple mounts are cluster of their single ones, satisfying safe working stresses and other characteristic / ratio of good design to meet most working requirement.
1-inch Deflection Type
- YDS-B, YDS-C (View the Specification)
- YDS-X, YDS-Y, YDS-Z (View the Specification)
Multiple Spring Mounts
- YDS-2-xxxx, YDS-3-xxxx, YDS-4-xxxx, YDS-6-xxxx, YDS-8-xxxx, YDS-9-xxxx (View the Specification)
2-inch Deflection Type
- YDS-2A, YDS-2B, YDS-2C (View the Specification)
Multiple Spring Mounts
- YDS-2-2Cxxxx, YDS-3-2Cxxxx, YDS-4-2Cxxxx, YDS-6-2Cxxxx, YDS-8-2Cxxxx, YDS-9-2Cxxxx (View the Specification)